Technical News Office, Bathing in cold water in winter is not everyone’s cup of tea. This is why we use geysers for hot water. In winter, apart from swimming, hot water is also necessary for daily activities. Geyser meets this need. But do you know that it is also very important to use the geyser correctly? If you want to use Geyser with caution, read this article in its entirety.
What is a geyser?
Geyser is an electronic machine that heats water. It is usually installed in the bathroom so that it can provide hot water for bathing. It consists of a tank and a heating element that heats the water. When you turn on the geyser, it heats the water in the tank using electricity, gas or solar energy. Then hot water comes out of the tap or shower.
Important Geyser Tips
If you want to know how to use the geyser in the bathroom correctly, pay attention to these tips.
Install the geyser at the right place: Install the geyser at a place where water and electricity or gas supply is easily available. Make sure the area is clean and ventilated.
Have the installation carried out by a professional: It is very important to install the geyser correctly. It would therefore be better if you had it installed by a professional.
Connect the geyser to water and electricity: Connect the geyser to water supply and electricity or gas. Check that all connections are correct and that there is no water leaking out of nowhere.
Turn on the geyser: Turn on the geyser power switch and wait for the water to heat up. Geysers have indicator lights that indicate whether the water is heating or not.
Adjust the temperature: Adjust the water temperature using the control panel or the geyser button. Set a moderate temperature initially, then increase or decrease it as needed.
Wait for the water to heat: give the geyser time to heat the water. Depending on the model and capacity of the geyser, the water may take a few minutes to heat up.
Check the water temperature: Once hot water comes out of the geyser, turn on the faucet or shower. Check the water temperature to verify that the water is not too hot and is safe to use.
